DIY Car Windshield Repair Kit Set with Windshield Repair Resin for Scratch/Chip Crack/Bulls-Eye/Spider Web/Star-Shaped/Half-Moon Crescents
Windshield chips are dangerous creating a pressure point in your windshield that will cause it to start cracking. Once it gets to the cracking stage it will cost you hundreds of dollars to replace. This is the cheap alternative that you will thank in the long run!
Using the Windshield Repair Kit you can easily repair cracks in your windshield and prevent them from spreading in just 20 minutes! Why take your vehicle in and spend hundreds of dollars when you can do it yourself for cheap? This Kit does not require any special tools, everything you need is included.
- Material – Advanced resin formula, all windshield repair material without chemicals or toxic material, good for multiple repairs
- Easy to Operate — The method of repairing slight glass cracks is to clean and dry the glass surface before construction and then squeeze the resin into the cracks of the cracks or bullets, then put on the curing strip, then quickly dry and solidify under ultraviolet light 5-10 mins. It is to scrape off the residual resin with a spatula
- Widely Used: The kit works best on small chips, bulls-eye, spider web, star-shaped, Half-moon crescents, crack not more than 12 inches/ 30 cm and round damage not more than one inch in diameter
- Saving You Time : windshield repair kit can quickly and effectively repair small cracks chips only in 20-30 minutes. Long-lasting maintenance effect
- Model: wrk15004
- Color: multicolor
- Material: plastic
- Storage capacity
- 100% Brand new and high-quality!
- Easy to use and operate, convenient for carrying and storage.
- Save you lots of cost and time to buy a piece of new glass.
- Match it with a curing light to achieve better repair effects.
- Practical car glass repair tool kit for all wise car owners.
- Allow you to cure and repair various kinds of damage caused by traffic accidents, impact, collisions, bump.
How to Apply It
- Step 1) Locate the chip or crack, prepare the location by cleaning with a cloth and water.
- Step 2) Attach the suction cups around the target location and secure to windshield.
- Step 3) Apply the plastic through the tube then twist to apply pressure on the plastic.
- Step 4) Remove and apply final strip with provided sealing liquid, let set for 20 mins and you are finished!
1 x repair resin
1 x repair device
1 x curing strips
1 x sleeved razor blade
1 x instruction sheet